FRIENDLY GUIDES FROM VET & WELFARE SOURCES ✦ GEAR AT THREE PRICES ✦ DOGS, CATS & SMALL PETS
← All guides

Fish & Aquariums ·

Why is your aquarium water cloudy? Match the colour to the cause

Cloudy tank water has a colour, and the colour is a clue. This guide helps you tell a bacterial bloom from dusty gravel, green algae and harmless tea-coloured tannins, using the water colour and the age of your tank.

Pick what you see and get a plain-English cause, what to do and what not to do. It also shows when cloudy water is a sign to test ammonia and nitrite and ask an aquatic vet or experienced aquatic shop.

Quiz · 5 min read

A cartoon fish in a tank of milky, cloudy water next to the title

Why did my tank go cloudy?

You looked at the tank this morning and the water had turned milky, green or tea-coloured. Don't panic and don't empty the tank. The colour is a clue, and most cloudy water is fixable with patience and a few small habit changes. A few causes are worth acting on quickly, so it pays to know which is which.

The colour and the age of the tank tell you most of what you need. Use the tool below, then read why each answer comes out the way it does.

What each colour usually means

Milky white: a bacterial bloom

In a brand-new tank, billions of tiny bacteria suddenly multiply in the water because there is food for them but not yet enough bacteria living on the filter and decorations to take over the work. The result is a milky haze. It usually clears by itself in about one to two weeks. Keep the filter running, feed lightly and avoid big water changes unless your test kit shows ammonia or nitrite. This is part of the normal start-up of a tank; our guide on why a new tank needs weeks before fish explains the nitrogen cycle behind it.

In a tank that has been running for months, sudden milky water is a different story. Common causes are overfeeding, too many fish for the tank, something decaying (uneaten food, a dead plant or a fish you have not found), or filter media that was washed under the tap. Tap water contains chlorine or chloramine, which harms the helpful bacteria. Always rinse filter sponges in a bucket of water taken from the tank.

Grey and dusty: substrate

Gravel and sand carry fine dust. If the substrate was not rinsed before it went in, or if you stirred it up while moving decorations, the water looks grey for a day or two. It settles by itself, and a piece of filter floss helps catch the particles. Rinse new substrate in a bucket first, next time.

Green: algae floating in the water

Green water is tiny free-floating algae. They need light and nutrients, so the usual causes are direct sunlight, lights left on all day, and extra food waste feeding the water. Move the tank out of direct sun, put the light on a timer for around eight hours a day, feed only what fish finish in a couple of minutes, and keep up regular partial water changes. Live plants compete with algae for nutrients. Some keepers add a UV clarifier to the filter, which can work quickly, but it does not fix the cause. Some hobbyists cover the tank for several days (a blackout), but opinions differ on whether that is kind to fish and plants, so we stick to the gentler steps above.

Tea-brown: tannins

New driftwood, dried leaves and seed pods release tannins, which tint the water yellow or brown. The tint is harmless and many fish from soft, leafy waters like it. If you want it gone, soak wood in a bucket before it goes in, add activated carbon to the filter and keep up regular water changes. If the water smells bad, or the fish seem unwell, test the water: that is not tannin.

Cloudy and the fish seem happy? Test first, change second. Cloudy and the fish struggle? Test and do a partial change straight away.

Things that make it worse

  • Changing all the water. It removes helpful bacteria and can trigger a fresh bloom. Partial changes, around a quarter at a time, are the usual rule.
  • Washing the filter in tap water. Use water from the tank.
  • Skipping the water conditioner. New water needs treating to remove chlorine or chloramine.
  • Adding chemical clearing products without a reason. Read the label, never overdose, and find the cause first.
  • Adding more fish. A cloudy new tank is still maturing; wait until ammonia and nitrite read zero.

When to ask an expert

Ammonia and nitrite should always read zero in a tank with fish. If the test shows either one, the fish are gasping, or they seem unwell, do a partial water change with treated water and ask an aquatic vet or an experienced aquatic shop for advice. This guide cannot diagnose illness and it does not recommend any medicine.

Sources

More Fish & Aquariums

Fetch another